Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Engine carrier to crankcase | Special screw, M10 x 130 | Tightening torque | 65 Nm (48 ft. lb.) | ||
| Engine carrier to crankcase | Collar nut, M10 - replace if necessary | Tightening torque | 65 Nm (48 ft. lb.) | ||
| Engine carrier to crankcase | Torx screw, M10 x 80 | Tightening torque | 65 Nm (48 ft. lb.) | ||
| Engine carrier to engine mounting | Collar nut, M12 | Tightening torque | 85 Nm (63 ft. lb.) |