Subsequent Work

Fit spark plugs.
→ 287020 REMOVING AND INSTALLING SPARK PLUGS - section on "Installing".

Fig 1: Fitting Spark Plug
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install bar ignition module.
→ WM 282019 REMOVING AND INSTALLING IGNITION COIL .

→ Tightening torque: 10 Nm (7.5 ft. lb.)
Install upper part of heat shield.
→ 261219 REMOVING AND INSTALLING HEAT SHIELD
1. 3.1. Insert heat shield and fit and tighten two external Torx screws (E10, M6 x 12).
  → Tightening torque: 10 Nm (7.5 ft. lb.)
Install rear silencer.
→ 263319 REMOVING AND INSTALLING REAR SILENCER .
Mount rear wheels.
Socket-wrench insert P300 should be used to avoid damaging the rims.

→ 44051900 REMOVING AND INSTALLING WHEEL .