LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- CARRERA (997) >> WM 1001Z1 Disassembling The Engine (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Information >> Tools And Materials

Tools And Materials

Loosen or tighten all threaded connections according to instructions in the document → 1X00IN TIGHTENING TORQUES FOR ENGINE MA101 AND MA102 .

Overview of special tools

Fig 1: Identifying Special Tools (Engine Disassembly)
G09815696Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Retaining device 9778  with piston receiving element with a diameter of 97 mm.
  2. Piston receiving element 9778/1  , diameter: 102 mm.
  3. Funnel 9784  or funnel 9784/2  for piston assembly, diameter: 97 mm or 102 mm.
  4. Piston assembly aid 9787  , diameter: 97 mm or piston assembly aid 9787/1  , diameter: 102 mm.
  5. Handle for assembly aid 9598  .
  6. Disassembly tool 9764  for piston-pin circlips.
  7. Disassembly tool 9777  and assembly tool for piston pins.
  8. Assembly tool 9776  for piston-pin circlips.
  9. Centering mandrel 9782  for connecting rods and pistons.
  10. Assembly aid 9783  for pressing out pistons (cylinders 1-3) and connecting rods with pistons (cylinders 4-6).

ohne Bild  - Rubber sleeves, assembly aid 9795  for protecting cylinder linings (assembly on connecting rods for cylinders 1-3).

scientia non olet · About LEMON Manuals