WM 1001Z1 Disassembling Engine - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO): Information

Loosen or tighten all threaded connections according to instructions in the document → 1X00IN TIGHTENING TORQUES FOR ENGINE MA170 AND MA170 S .

Overview of special tools

Fig 1: Identifying Engine Disassembly Special Tools

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Retaining device 9778  with piston receiving element, diameter: 97 mm
2. Piston receiving element 9778/1  , diameter: 102 mm
3. or funnel 9784/2  for installing pistons, diameter: 102 mm
4. Assembly aid for pistons 9787/1  , diameter: 102 mm
5. Handle of assembly aid 9598 
6. Disassembly tool 9764  for piston-pin circlips
7. Disassembly tool 9777  and assembly tool for piston pins, turbo engine (diameter: 23 mm)
8. Assembly tool 9776/1  for piston-pin circlips, turbo engine
9. Centering mandrel 9782  for connecting rods and pistons.
10. Assembly Aid 9783  for pressing out pistons (cylinders 1-3) and connecting rods with pistons (cylinders 4-6)

ohne Bild  - Rubber sleeves, Assembly Aid 9795  for protecting cylinder linings (assembly on connecting rods for cylinders 1-3)