Engine number marking

Information 

• Do not use steel stamping numbers to mark the engine number on direct fuel injection engines. 
• Due to the material composition, the engine number must be engraved using the specified tool. 

1. Connect compressed-air marking pen Nr.197 -1-  to compressed air supply.
   1. 1.1. Turn the adjusting ring to -arrows-  open or close the compressed air supply.
      Fig 1: Turning Adjusting Ring (Pen No. 197)

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Use the marking pen to engrave the engine number into the crankcase.
   Fig 2: Example Of Engine Number

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 2.1. To provide a clear marking, use a 0.5 (5 mm) template! 
      Fig 3: Example Of Template

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.