Technical Values

Location	Description	Type	Basic value	Tolerance 1
Coolant drain plug	Replace sealing ring	Tightening torque	10 Nm (7.5 ft. lb.)	+5 Nm (+3.5 ft. lb.)
Crash support to joint	M8	Tightening torque	23 Nm (17 ft. lb.)
Collar nut on engine mounting	M12	Tightening torque	85 Nm (63 ft. lb.)
Transmission support to body	M10	Tightening torque	65 Nm (48 ft. lb.)
Crash support to joint	M8	Tightening torque	23 Nm (17 ft. lb.)
Clutch line	a/f 15	Tightening torque	30 Nm (22 ft. lb.)
Ground strap to body	M8	Tightening torque	23 Nm (17 ft. lb.)
Screw-type clamp on pressure hose for turbocharger		Tightening torque	3 Nm (2 ft. lb.)
Drive shaft flange to manual transmission	M10 x 1	Tightening torque	90 Nm (67 ft. lb.)
Transmission bracket to body	M10	Tightening torque	65 Nm (48 ft. lb.)
Rear-axle carrier	M12	Tightening torque	110 Nm (81.5 ft. lb.)
Transverse strut to carrier side section	M10	Tightening torque	65 Nm (48 ft. lb.)
Diagonal brace to carrier side section	M10	Tightening torque	65 Nm (48 ft. lb.)
Diagonal brace to rear-axle carrier	M12	Tightening torque	110 Nm (81.5 ft. lb.)
Tailpipe cover to rear silencer	M8	Tightening torque	30 Nm (22 ft. lb.)
Wheel to wheel carrier	M14	Tightening torque	130 Nm (96 ft. lb.)