LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- CARRERA (997) >> WM 197819 Removing And Installing Coolant Temperature Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: Vehicle can fall down
  • Risk of squashing or crushing
  • Risk of damage to the vehicle

→ Do not place any solid objects under the raised vehicle.

→ Ensure that the lifting platform is prevented from lowering.

→ Remove solid objects before lowering the vehicle.

→ Raise the vehicle only at the jacking points provided.

→ The outer jacking points should be used primarily.

  1. Raise the vehicle.

    → 4X00IN01 LIFTING THE VEHICLE .

  2. Place protective covers on the vehicle to avoid damaging the vehicle.
    WARNING: Hot fluid
    • Danger of scalding

    → Let the fluid cool down.

    → Wear personal protective gear.

  3. Allow engine to cool down.
  4. Remove air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - TURBO - section on "Removing"

  5. Place coolant collection pan underneath.