Preliminary Work

→ Let hot components cool down.

→ Wear personal protective gear.

1. Remove pressure pipe.

   → 214119 REMOVING AND INSTALLING PRESSURE PIPE .

2. Remove air cleaner housing.

   → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .

3. Remove fuel filter.

   → 206019 REMOVING AND INSTALLING FINE FUEL STRAINER .

4. Drain coolant.

   → 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING) .

   WARNING: Danger of objects or loads falling down

   • Risk of squashing or crushing

   → Secure components to prevent them from falling down.

   WARNING: Danger of objects or loads falling down

   • Risk of squashing or crushing

   → Secure components to prevent them from falling down.

5. Lower the engine.

   The engine can be lowered by max. 40 mm. 

   Support the engine with a jack and Retainer Plate 9592  .

   Screw off M12 collar nuts on the engine mounting. Carefully lower the engine using the jack.