| Oil feed line to turbocharger 1-3 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Upper oil feed line to turbocharger 1-3 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Lower coolant line to turbocharger 1-3 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Vent line to turbocharger 1-3 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Coolant lines to bracket 1-3 |
M6 x 12 external Torque |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Oil feed line to cylinder head 1-3 |
M6 x 12 external Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Holding clamp for oil feed line 1-3 |
M6 x 12 external Torx screw |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Intake manifold to turbocharger 1-3 |
M6 x 12 external Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Oil feed line to turbocharger 4-6 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Lines on turbocharger 4-6 |
M6 x 10 internal Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Coolant line to bracket 4-6 |
M6 x 12 external Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Oil feed line to cylinder head 4-6 |
M6 x 12 external Torque |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Holding clamp for oil feed line 4-6 |
M6 x 12 external Torx screw |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Intake manifold to turbocharger 4-6 |
M6 x 12 external Torx |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|