Preliminary Work
- Remove air cleaner housing. → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .
- Remove tailpipe covers.
→ 263519 REMOVING AND INSTALLING TAILPIPE COVER - TURBO .
WARNING: Danger of objects or loads falling down- Risk of squashing or crushing
→ Secure components to prevent them from falling down.
Information
- When lowering, the engine must not rest on the rear axle cross member.
Information
- It may only be supported over a large area at the oil pan.
- Localized loading is not permitted.
- Lower the engine.
- 3.1. Support the engine at the oil pan with a transmission jack.
Transmission and unit jack Junior Jack 2.0 WE 1223 ; GA passenger car transmission plate WE 1224
- 3.2. Loosen two M12 collar nuts (T55) on the rear engine mountings.
- 3.3. Slowly lower the engine using the transmission jack.
- 3.1. Support the engine at the oil pan with a transmission jack.