Removing Charge Air Cooler
- Remove rapid-action coupling from bottom of suction hose and top of pressure hose by pulling the spring clamps on the charge air cooler.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Undo two hexagon-head bolts (M8 x 16) and one M8 hexagon nut on the charge air cooler bracket in the wheel housing.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unscrew one hexagon-head bolt (M8 x 16) -2-
, one M8 hexagon nut -1-
on the charge air cooler bracket and one tapping screw at the rear side.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw off two speed nuts (a/f 13) on the underside of the heat protection panel.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove charge air cooler module.