Preliminary Work
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
- Remove rear wheels. Use the specified special tool Socket-Wrench Insert P300 to avoid damaging the wheel rims → 44051900 REMOVING AND INSTALLING WHEEL .
- Remove rear apron → 635519 REMOVING AND INSTALLING REAR APRON - section on "Removing".