| Oil pressure line to turbocharger |
Internal Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Upper coolant line to turbocharger |
Internal Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Lower coolant line to turbocharger |
Internal Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Vent line to oil tank |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Turbocharger holder |
External Torx screw, M6 x 12 |
Tightening torque |
23 Nm (17 ft. lb.) |
|
|
| Vent line holder |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Return line to oil tank and holder |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Exhaust temperature sensor to turbocharger |
Union nut, M12 |
Tightening torque |
35 Nm (26 ft. lb.) |
+/-3 Nm (+/- 2 ft. lb.) |
|
| Exhaust manifold flange |
Collar nuts, M8 |
Tightening torque |
25 Nm (19 ft. lb.) |
|
|
| Intake air line to turbocharger, cylinder bank 1-3 |
External Torx screw, M6 x 30 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Intake air line to turbocharger, cylinder bank 4-6 |
External Torx screw, M6 x 20 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Engine carrier to engine mounting |
Collar nuts, M12 |
Tightening torque |
85 Nm (63 ft. lb.) |
|
|