Technical Values

Location	Description	Type	Basic value	Tolerance 1
Oil and coolant lines on turbocharger	External and internal Torx screws, M6	Tightening torque	10 Nm (7.5 ft. lb.)
Oil return line to turbocharger	External Torx screw, M6 x 12	Tightening torque	10 Nm (7.5 ft. lb.)
Union nut securing exhaust temperature sensor to turbocharger	M12 (a/f 14), grease with Optimol MF paste	Tightening torque	35 Nm (26 ft. lb.)	+/-3 Nm (+/- 2 ft. lb.)
Holding clamp securing oil extraction line to tandem pump	External Torx screw, M6 x 16	Tightening torque	10 Nm (7.5 ft. lb.)
Turbocharger to exhaust manifold	Lock nut, M8	Tightening torque	25 Nm (19 ft. lb.)
Screw on turbocharger holder	External Torx screw, M8 x 16	Tightening torque	23 Nm (17 ft. lb.)
Intake pipe to turbocharger	External Torx screw, M6 x 20	Tightening torque	10 Nm (7.5 ft. lb.)
Heat shield to turbocharger	M6 collar nut	Tightening torque	10 Nm (7.5 ft. lb.)
Oil and coolant lines on turbocharger	External and internal Torx screws, M6	Tightening torque	10 Nm (7.5 ft. lb.)
Oil return line to turbocharger	External Torx screw, M6 x 12	Tightening torque	10 Nm (7.5 ft. lb.)
Union nut securing exhaust temperature sensor to turbocharger	M12 (a/f 14), grease with Optimol MF paste	Tightening torque	35 Nm (26 ft. lb.)	+/-3 Nm (+/- 2 ft. lb.)
Holding clamp securing oil extraction line to tandem pump	External Torx screw, M6 x 16	Tightening torque	10 Nm (7.5 ft. lb.)
Turbocharger to exhaust manifold	Lock nut, M8	Tightening torque	25 Nm (19 ft. lb.)
Screw on turbocharger holder	External Torx screw, M8 x 16	Tightening torque	23 Nm (17 ft. lb.)
Intake pipe to turbocharger	External Torx screw, M6 x 20	Tightening torque	10 Nm (7.5 ft. lb.)