Subsequent Work

→ Make sure the heat protection panels overlap correctly.

→ Replace damaged or deformed heat protection panels.

→ Check heat protection panels for deformation, secure fixing of the aluminum braided cord, cracks and missing or damaged fixing tabs.

→ At least 80% of the total sealing area must be sealed without gaps.

1. Install rear silencer.

   → 263319 REMOVING AND INSTALLING REAR SILENCER .

2. Install charge-air cooler.

   → 214319 REMOVING AND INSTALLING CHARGE-AIR COOLER - GT2 RS .

3. Fill in coolant up to the Max. marking on the coolant reservoir.
4. Check engine-oil level and top up with new engine oil if necessary.

   → 170101 CHECKING ENGINE-OIL LEVEL - GT2 RS .

5. Carry out a test drive. Check the coolant and oil level and correct it if necessary.