LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997) >> WM 408519 Removing And Installing Front Spring Strut (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO) >> Removing And Installing Spring Strut - Subsequent Work

Removing And Installing Spring Strut - Subsequent Work

  1. Fit front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  2. On vehicles with all-wheel drive (911 Carrera 4/911 Turbo), tighten the drive shaft fastening at the side of the wheel to 460 Nm (340 ftlb.). Actuate the brake while doing this.
  3. Check wheel alignment values on front axle and adjust if necessary → 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT .
scientia non olet · About LEMON Manuals