LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997) >> WM 405019 Removing And Installing Front Wheel Bearing Housing (Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

  1. If the wheel bearing or wheel bearing housing is replaced, loosen the central nut on the wheel side before raising the vehicle. Actuate the brake while doing this.
  2. Raise the vehicle → 400000 LIFTING THE VEHICLE .
  3. Remove front wheel → 440519 REMOVING AND INSTALLING WHEEL .
  4. Remove front underbody panel → 519219 REMOVING AND INSTALLING FRONT COVER .
scientia non olet · About LEMON Manuals