LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 40 - Front Wheel Suspension, Drive Shafts -- CARRERA (997) >> WM 401819 Removing And Installing Diagonal Arm (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO) >> Removing Diagonal Arm

Removing Diagonal Arm

  1. Raise the vehicle → 400000 LIFTING THE VEHICLE .
  2. Loosen diagonal arm (described below) and remove it.

    Loosen threaded joint -1-  connecting diagonal arm to trailing arm (wishbone). Turn in wheel as required.

    Loosen threaded joint -2-  connecting diagonal arm to body through the opening (bore) in the underbody panel.

    On the 911 Turbo, remove the spoiler -3-  at the diagonal arm (air guide for the brake cooling system). Generally, the spoiler -3-  must be removed in order to replace the diagonal arm.

    Fig 1: Identifying Diagonal Arm Components
    G09825532Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals