LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 39 - Final Drive - Differential, Differential Lock -- CARRERA (997) >> WM 397919 Removing And Installing Electromagnetic Clutch (Turbo Coupe, Turbo S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: Vehicle can fall down
  • Risk of squashing or crushing
  • Risk of damage to the vehicle

→ Do not place any solid objects under the raised vehicle.

→ Ensure that the lifting platform is prevented from lowering.

→ Remove solid objects before lowering the vehicle.

→ Raise the vehicle only at the jacking points provided.

→ The outer jacking points should be used primarily.

  1. Jack and raise the vehicle at the prescribed jacking points.

    → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)

  2. Remove underbody panelling.

    → 519419 REMOVING AND INSTALLING REAR COVER - section on "Removing"

    → WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - section on "Removing"

    → 519219 REMOVING AND INSTALLING FRONT COVER - section on "Removing"

  3. Remove the cardan shaft.

    → WM 390219 REMOVING AND INSTALLING CARDAN SHAFT (TURBO COUPE & TURBO CABRIO)  - section on "Removing"

  4. Drain clutch fluid for front final drive.

    → 399055 CHANGING OIL FOR FRONT FINAL DRIVE  - section on "Draining"

  5. Remove front final drive.

    → 398819 REMOVING AND INSTALLING FRONT FINAL DRIVE  - section on "Removing"

  6. Remove support for front final drive.

    → WM 396219 REMOVING AND INSTALLING SUPPORT FOR FINAL DRIVE (CARR. 4 COUPE, TURBO COUPE, CARR. 4S COUPE, TURBO S COUPE, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, TURBO CABRIO & TURBO S CABRIO)  - section on "Removing"