LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 39 - Final Drive - Differential, Differential Lock -- CARRERA (997) >> WM 396219 Removing And Installing Support For Front Final Drive (CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO & Turbo CABRIO) >> Installing Support For Front Final Drive

Installing Support For Front Final Drive

  1. Fit support with angled side facing upwards.
  2. Screw in and tighten fastening screws.
    Fig 1: Locating Front Final Drive Support Screws
    G09825349Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Location Description Type Basic value Tolerance 1 Tolerance 2
    Fastening screws securing support to transmission Stage 1 Tightening torque 5 Nm (3.5 ft. lb.)    
  3. Tighten fastening screws again.
    Location Description Type Basic value Tolerance 1 Tolerance 2
    Fastening screws securing support to transmission Stage 2 Tightening torque 65 Nm (48 ft. lb.)    
scientia non olet · About LEMON Manuals