Preliminary Work
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
- Jack and raise the vehicle at the prescribed jacking points.
- Remove front underbody panelling.
→ WM 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY - section on "Removing"
- Remove front drive shaft.
→ 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT - section on "Removing"
- Place oil collection pan under the transmission.