Preliminary Work
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
→ Do not place any solid objects under the raised vehicle.
→ Ensure that the lifting platform is prevented from lowering.
→ Remove solid objects before lowering the vehicle.
→ Raise the vehicle only at the jacking points provided.
→ The outer jacking points should be used primarily.
- Jack and raise the vehicle at the prescribed jacking points.
- Remove underbody panelling.
→ 519419 REMOVING AND INSTALLING REAR COVER - section on "Removing"
→ WM 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY - section on "Removing"