Disassembling Rear Spring Strut

Pre-tension coil spring using spring clamp for spring struts Nr.121 until the piston rod is relieved. The appropriate forks must be inserted into the spring clamp.

Fig 1: Removing Tensioning Spring (Example)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Use a suitable socket-wrench insert, e.g. socket-wrench insert for ATF temp. switch assembly Nr.18 to loosen the connection between the piston rod and spring-strut mount.
When loosening the connection , counter at the bolts on the spring-strut mount (screw hexagon nuts onto the bolts and use a suitable lever).

Fig 2: Loosening Connection Between Piston Rod And Spring-Strut Mount
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove all parts from the piston rod.