| Stud on front-axle cross member |
|
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Fastening nut on stud |
|
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Drive shaft |
Fastening screws between drive shaft and transmission flange |
Tightening torque |
39 Nm (29 ftlb.) |
|
|
| Drive shaft to wheel hub |
Before installing the drive shaft, use Optimoly HT to lightly grease the toothing and thread. Use a new lock nut |
Tightening torque |
460 Nm (340 ftlb.) |
|
|
| Retaining strap securing cover to body |
|
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Diagonal brace |
Tightening torque |
100 Nm (74 ftlb.) |
|
|