Installing brake master cylinder
- Install in reverse order. Tighten fastening nuts -1-
on the brake master cylinder to the prescribed tightening torque. → WM 4700TW TIGHTENING TORQUES FOR BRAKE HYDRAULICS (ALL MODELS) .
- Brake master cylinder mount
- Brake booster mount
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
- Bleed the brake system and adjust the brake-fluid level. → 470107 BLEEDING THE BRAKE SYSTEM .
- Carry out the following tests:
- Check the system for leaks.
- Then start the engine. Brake-related lights in the instrument cluster must go out when the engine is running.
- Carry out a function test on the brakes.