Removing Front Brake Pads - PCCB Brakes
- If necessary, extract a little brake fluid from the reservoir in order to prevent an overflow when the disc brake pads are pushed back!
- Remove fastening screw at the retaining pin. Then screw the M8 auxiliary screw into the retaining pin. Hold down the expanding spring with a screwdriver and remove retaining pin.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove warning contact wire at the brake calliper and expanding spring. Remove warning contacts from the disc brake pads.
- Brake piston resetting fixture 9472
(for 6-piston brake calliper) must be positioned on the brake calliper between the disc brake pads. Then press the pads back evenly -direction arrows-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove disc brake pads.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.