LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 - Brakes - Brake Mechanics -- CARRERA (997) >> WM 460519 Removing And Installing Brake Pedal (All Models) >> Installing Brake Pedal And Clutch Pedal >> Installing Brake Pedal

Installing Brake Pedal

Fig 1: Exploded View Of Brake Pedal
G09826006Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Brake light switch
  2. Pedal axle
  1. 4  - Threaded bushing
  2. 5  - Bolt (replace after loosening)
  3. 6  - Brake pushrod
  4. 7  - Brake pedal
  5. 8  - Bearing sleeves
  1. Grease bracket for brake pedal.

    Grease bracket close to the pedal bearing axle -Arrows-  with Renocal (Glissando VW 745). Part No. 000.043.206.21 (10g tube).

  2. Insert brake pedal.

    Turn the brake pedal -7-  and brake pushrod -6-  as required.

  3. Fit brake pushrod on brake pedal. Use a new bolt, see -Inset-  (replace bolt after loosening).

    Tighten new bolt, see -Inset-  .

    → Tightening torque: +10 Nm (+7.5 ftlb.) 

    Fig 2: Identifying Brake Pushrod Bolt And Threaded Bushing
    G09826007Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Install pedal axle.

    Tighten pedal axle -2-  .

    → Tightening torque: +10 Nm (+7.5 ftlb.)-2 Nm (-1.5 ftlb.) 

scientia non olet · About LEMON Manuals