LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> 45 - Anti Lock Brake (Abs) -- CARRERA (997) >> WM 455919 Removing And Installing Rotation-Rate Sensor For PSM (All Models) >> Subsequent work

Subsequent work

  1. After installing the rotation-rate sensor, read out the PSM fault memory with the PIWIS Tester (diagnostic tester) and erase it.

    Carry out a static test. Then start the engine. The PSM-related lights in the instrument cluster must go out when the engine is running.

    Read out the PSM fault memory again. There must not be any stored faults.

    Fig 1: Identifying Diagnostic Tester
    G09825987Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals