Calibrating The Convertible Top

Information 

• The convertible top opens and closes automatically during convertible-top calibration with the PIWIS Tester 9718  . Calibration can be started irrespective of whether the convertible top is open or closed. The latching hook in roof frame 1 does not close during calibration. There must not be any objects in or on the convertible top to obstruct this. 

1. Connect and switch on the PIWIS Tester 9718  .
2. Switch on ignition.
3. Select the menu item Convertible Top, Drive Links  , and select Calibrate  menu item in the command line which then appears.
4. Start calibration with the [F7] key.