Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing hydraulic pump to holder | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Banjo bolt to hydraulic pump | Tightening torque | 12 Nm (9 ft. lb.) | +2 Nm (+1.5 ft. lb.) | ||
| Banjo bolt to hydraulic pump | Tightening torque | 12 Nm (9 ft. lb.) | +2 Nm (+1.5 ft. lb.) | ||
| Screw plug to hydraulic pump | Tightening torque | 1 Nm (0.5 ft. lb.) | +/-0.3 Nm (+/- 0.2 ft. lb.) |