Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear cover at the center with respect to rear cover at the sides | Continuous seam joining line | Gap dimension A | 5 mm | 1.5 mm | |
| Rear cover at the center/sides with respect to convertible-top compartment lid | Gap dimension A | 7 mm | 1 mm | ||
| Rear cover at the center/sides with respect to convertible-top compartment lid | Gap dimension B | 2 mm | 1.3 mm | ||
| Fastening screws securing linkage to rollover bar frame | Tightening torque | 45 Nm (33 ft. lb.) |