| Rear cover at the center to rear cover at the sides |
Continuous seam joining line |
Gap dimension A |
5 mm |
1.5 mm |
|
| Rear cover at the center to convertible-top compartment lid |
|
Gap dimension B |
7 mm |
1 mm |
|
| Rear cover at the center to convertible-top compartment lid |
|
Gap dimension C |
2 mm |
1.3 mm |
|
| Rear cover at the sides to convertible-top compartment lid |
|
Gap dimension A |
7 mm |
1 mm |
|
| Rear cover at the sides to convertible-top compartment lid |
|
Gap dimension B |
2 mm |
1.3 mm |
|
| Rear cover at the sides to cover |
|
Gap dimension C |
5 mm |
1 mm |
|
| Fastening screw securing rear cover to linkage |
Item 1 |
Tightening torque |
1 Nm (0.5 ft. lb.) |
|
|
| Fastening screw securing rear cover to linkage |
Item 2 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Fastening screw securing rear cover to linkage |
Items 3-4 |
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Fastening screw securing rear cover to linkage |
|
Tightening torque |
10 Nm (7.5 ft. lb.) |
|
|
| Fastening screw securing seat belt to body |
|
Tightening torque |
50 Nm (37 ft. lb.) |
+/-10 % |
|