Installing Flap Motor

Insert motor in the spindle mounting -1- and in the bracket for the rear panel flap -2- .

Fig 1: Inserting Flap Motor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw down motor with the four fastening screws -3- .
Information

When installing the flat connectors with the electric connecting lines, the correct installation position in the central connector (see 9797IN CONNECTOR - GENERAL INFORMATION ) must be observed.
Insert the two flat connectors with the electric connecting lines -1- in the central connector -2- -arrows- until they are felt to engage.

Fig 2: Installing Cable Connections
Courtesy of PORSCHE CARS NORTH AMERICA, INC.