Making Swivel Arm

Make swivel arm -C-  with basic material Multiplex plate 550 x 200 mm, 25 mm thick.

Fig 1: Identifying Swivel Arm Dimension

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. -A1-  = Retaining bracket
2. -A2-  = Hinge
3. -A5-  = countersunk screw 4.5 x 20
4. -A6-  = countersunk screw 6 x 20
5. -C-  = Swivel arm

1. Work procedure: 
   1. 1.1. Fit retaining bracket -A1-  with 2 countersunk screws -A6-  following the dimensions specified on the swivel arm -C-  .
   2. 1.2. Fit hinge -A2-  with 4 countersunk screws -A5-  following the dimensions specified on the swivel arm -C-  .