Installing Sun Blind
- Tension tensioning axle -1-
on sun blind -2-
by turning it 17 turns anti-clockwise using a steel pin with Ø = 2.5 mm -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Hold the square with a universal pliers and press it into the tensioning axle -1-
(-Arrow A-
). In the slotted opening on the sun blind -3-
, lock the tensioning axle with the steel pin -2-
(-Arrow B-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Guide right side of tensioning axle -1-
into the mounting saddle -2-
(-Arrow A-
). Pull out the steel pin -3-
(-Arrow B-
) and guide left side of sun blind into the mounting saddle -Arrow C-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position sun blind -1-
over the support bow bracket -2-
. Insert guide strut -3-
into the drivers -4-
at the left and right and align it at a 90° angle to the roof assembly.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Insert sun blind -1-
into the support bow bracket -2-
at the left and right.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.