Installing Sunroof Control Unit

Information 

• Pull out ignition key. 

1. Plug in connector -5-  and fold locking lever over -G-  until it engages. Plug in the two connectors -4-  until they engage securely.
   Fig 1: Plugging Connectors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Plug in connector -3-  and close the slide in direction -C-  .
   Fig 2: Plugging Connectors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Push in the control unit -2-  first in direction -B-  and then in direction -A-  . Tighten fastening screws -1-  . → Tightening torque: 5.6 Nm (4.0 ftlb.) 
   Fig 3: Securing Sunroof Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.