Removing Cowl Panel Cover
- Loosen cowl panel cover.
- 1.1. Open cover for sliding roof.
- 1.2. Press air deflector -2- down.
- 1.3. Remove rubber sleeves -3- and unscrew tapping screws -4- on the cowl panel cover -1- .
Information
The cowl panel cover will be irreparably damaged during removal and must be replaced.
- Remove cowl panel cover.
- 2.1. Lift up cowl panel cover -1- at the left and right with a plastic wedge and release the retaining clips -2- using a screwdriver -Arrow A- .
- 2.2. Heat the cowl panel cover -1- with a hot-air gun v.a.g 1416 .
- 2.3. Remove cowl panel cover -1- by pulling it upwards -Arrow B- .