Disassembling Frame For Sliding Roof Cover
- Unscrew fastening screws -1-
on the drive tubing (metal guide tubes) -2-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unscrew fastening screws -1-
and fastening nuts ↓-2-
at the left and right on the drive tubing -3-
and pull tubing out slightly in -direction of arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Unscrew fastening nuts -1-
on the blind shaft mount at the right -2-
and left -3-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull drive shaft -1-
at the left and right in -direction of arrow-
to remove it from the frame for the sliding roof cover -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull support bow -1-
and bracket -2-
out of the frame for the sliding roof cover -3-
in -direction of arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Drill out rivets -1-
on the profile strip -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull seal -1-
up all the way around out of the groove in the frame for the sliding roof cover -2-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.