LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 60 - Sliding Roof, Tilting Roof -- CARRERA (997) >> WM 602819 Removing And Installing Frame For Sliding Roof (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 Turbo S Coupe, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS) >> Removing Frame For Sliding Roof

Removing Frame For Sliding Roof

Fig 1: Identifying Sliding Roof Frame Position
G09824540Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Disconnect water drain hoses at the front -1-  and rear -2-  from the water drain brackets of the frame for the sunroof.
    Fig 2: Pulling Off Water Drain Hoses
    G09824541Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press in locking tabs on both sides -arrows A-  and pull off the electric plug connection for the sunroof motor -arrow B-  .
    Fig 3: Disconnecting Sunroof Motor Plug Connection
    G09824542Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    NOTE: Sliding-roof frame removed/fitted incorrectly
    • Risk of damage to seats

    → Fold rear seat assembly over and tilt the front-seat backrests back.

  3. Unscrew the fastening screws -2-  at the front of the sliding roof frame -1-  .
  4. Undo the fastening screws -3-  from the frame for the sliding roof -1-  at the sides.
  5. Remove the sliding roof frame -1-  with an assistant and pull it out of the passenger compartment through the door aperture.
  6. Fig 4: Loosening Sliding Roof Frame
    G09824543Courtesy of PORSCHE CARS NORTH AMERICA, INC.