Reworking Rear Window Cover

1. 1.1. Check the excess force at the rubber stop -1-  by hand from the inside through the rear window cover -2-  . If you can move the rubber stop -1-  , then the excess force must be corrected by unscrewing the rubber stop (max. 1 turn).
   Fig 1: Checking Rubber Stop Adjustment At Rear Window Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Check the contact between the rear window cover and rubber stop using a strip of paper.
   Fig 2: Checking Contact Pressure Of Rear Window Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• If the paper strip can be pulled out, then the excess force at the rubber stop must be corrected. Adjust the closing aid if necessary. →  INSTALLING CLOSING AID