Installing Support For Side Trim Panel At The Left And Right

Install side trim panel support.
Information

Left side only.
1. 1.1. Insert plug connection for roof assembly -3- into the side trim panel support -2- from below -Arrow A- and turn it -Arrow B- .
2. 1.2. Insert side trim panel support -2- (-Arrow C- ) and clip it in using the retaining clip -Arrow D- .
3. 1.3. Tighten fastening nuts -1- . → Tightening torque: 5 Nm (3.5 ftlb.)
  
  Fig 1: Installing Side Trim Panel Support
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.