Mounting Roof Assembly On Assembly Fixture

→ Set the component down on a clean surface, workbench or assembly fixture.

Fig 1: Overview Of Mounting Roof Assembly On Assembly Fixture

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. WE1082 Transmission Jack V.A.G 1383 A 
2. Retaining frame 9695 
3. Support 9695/1 
4. Roof assembly

1. Get the assembly fixture ready.
   1. 1.1. Insert retaining frame 9695 -2-  into the → WE1082 transmission jack V.A.G 1383 A -1-  .
   2. 1.2. Secure holder 9695/1 -3-  on the retaining frame 9695 -2-  at the positions shown using fastening screws and inlay nuts.
   Fig 2: Securing Support On Retaining Frame
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   3. 1.3. Holder 9695/1 -3-  must then be aligned to the → dimension A: 80 mm  and the → dimension B: 975 mm  .
      Fig 3: Aligning Support To Retaining Frame

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Secure roof assembly to the assembly fixture.
   1. 2.1. Position roof assembly -4-  on the holder 9695/1 -3-  and secure with fastening screws (M8 x 30).
      Fig 4: Securing Roof Assembly To Assembly Fixture

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.