Installing Rear Side Trim Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Plug in the electric plug connection -1-
on the loudspeaker -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position side trim panel -3-
on the inside of the rear side section and the inside of the lower side member and press the locking tabs into the clamps.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position stop -2-
and screw down locking pins -1-
. Tightening torque → Tightening torque: 37 ft. lb. +1.5 ft. lb.
- Check plug-in nut -3-
and replace if necessary. Position and tighten fastening screw -2-
in the side-panel trim -2-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Position locking tabs of collar of opening for belt -1-
on side trim panel and press them in.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Lift up the pillar seal -1-
using a plastic spatula -2-
along the side trim panel -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fold up rear backrest and lock it.