LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- CARRERA (997) >> WM 703119 Removing And Installing Trim Panel For Rear Wall (Speedster) >> Removing Trim Panel For Rear Wall

Removing Trim Panel For Rear Wall

  1. Unscrew fastening screws -1-  .
    Fig 1: Detaching Rear-Wall Trim Panel
    G09829156Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Detach Velcro fasteners -2-  in the marked area -arrows-  .
  3. Carefully fold the rear-wall trim panel -1-  at the left side inwards -arrow A-  and disengage the tab -2-  (-arrow B-  ).
    Fig 2: Removing Trim Panel For Rear Wall
    G09829157Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Guide the rear-wall trim panel -1-  at the right out of the frame for the roll-over protection system -3-  (-arrow C-  ).