Installing Trim Panel For Rear Wall
- Secure the trim panel -1-
at the right into the frame for the roll-over protection system -3-
(-arrow A-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Carefully secure the rear-wall trim panel -1-
in the tab on the left side -2-
(-arrow B-
) and align it -arrow C-
.
- Align the rear-wall trim panel and secure with the fastening screws -1-
. → Tightening torque: 2.5 Nm (2 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Press on Velcro fasteners -2-
in the marked area -arrows-
.