Removing The Rear Logo

Fig 1: Identifying Rear Logo Area

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heating the rear lid
1. 1.1. Heat the rear lid -1- close to the logo -2- using the hot-air blower v.a.g 1416 -3- .
  
  Fig 2: Heating Rear Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Levering off the logo using a plastic spatula
1. 2.1. Move a plastic spatula -1- under the logo -2- and lift it up.
  
  Fig 3: Levering Off Logo
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean the rear lid
1. 3.1. Loosen adhesive residue -1- on the rear lid -2- using silicone remover and remove it.
  
  Fig 4: Cleaning Rear Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.