LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 66 - Exterior Equipment -- CARRERA (997) >> WM 665055 Replacing Rear Logo (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Replacing Model Logo >> Replacing The Turbo Model Logo

Replacing The Turbo Model Logo

  1. Find the middle of the rear lid.
  2. Position the logo -Turbo-  with the dimensions -A and C- → Dimension: 92 mm  and -B- → Dimension: 36 mm- 1 mm  on the rear lid and stick it on.
Fig 1: Identifying Turbo Logo Dimension
G09826923Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals