LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 66 - Exterior Equipment -- CARRERA (997) >> WM 663119 Removing And Installing Sill Cover (Except 911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Sill Cover >> Notes

Removing Sill Cover: Notes

Fig 1: Identifying Sill Cover Position
G09826820Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screw -1-  from the vehicle underbody.
    Fig 2: Loosening Sill Cover At Bottom
    G09826821Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -1-  from rear wheel housing liner -2-  and pull out the wheel housing liner slightly.
    Fig 3: Releasing Wheel Housing Liner
    G09826822Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew fastening screw -1-  .
    Fig 4: Loosening Rear Sill Cover
    G09826823Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Pull out sill cover -1-  , beginning at the rear, from the fixing clips -2-  .
    Fig 5: Removing Sill Cover
    G09826824Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Check fastening clips -1-  , and replace if necessary.
  6. Check clamps -2-  on the vehicle underbody, and replace if necessary.
  7. Fig 6: Checking Fixing Clips And Clamps
    G09826825Courtesy of PORSCHE CARS NORTH AMERICA, INC.