| Fastening screw securing door entry guard to body |
|
Tightening torque |
2 Nm (1.5 ftlb.) |
+/-20 % |
|
| Fastening screw securing door entry guard to body |
|
Tightening torque |
2 Nm (1.5 ftlb.) |
+/-20 % |
|
| Fastening screw securing rear wheel housing liner to door entry guard |
|
Tightening torque |
2 Nm (1.5 ftlb.) |
+/-20 % |
|
| Sill cover to door sill |
|
Gap dimension A |
1.3 mm |
+0.5 mm |
|
| Sill cover to door sill |
Door sill only lowered |
Gap dimension B |
2 mm |
-1 mm |
|
| Sill cover to door sill rear in wheel housing |
|
Gap dimension A |
1.3 mm |
+0.5 mm |
|
| Sill cover to door sill at front in wheel housing |
|
Gap dimension A |
1.1 mm |
|
|