LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 6X - Body-Equipment Outside - General -- CARRERA (997) >> WM 6X00IN General Information On Installing And Removing Car Windows (Applies To All Models Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO And Gt3 RS 4.0) >> Removing Glass With Cutting Wire Separator >> Attaching Cutting Thread To The Body

Attaching Cutting Thread To The Body

  1. Attach the loose end of the cutting thread -B-  firmly at a suitable point on the body with the fastening screw -2-  of a component (e.g. wiper motor fastening). To do this, unscrew the fastening screw, wind the cutting thread -B-  around the screw and tighten the fastening screw again.
    Fig 1: Attaching Cutting Thread To Body
    G09824388Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals